![favicon_GI.png]](https://knowledge.gantner-instruments.com/hs-fs/hubfs/favicon_GI.png?width=40&height=40&name=favicon_GI.png){kind=small}
Data Acquisition Software
How-to guides and quick tips for configuring, using and troubleshooting GI.bench and GI.cloud software.
GI.bench tips & tricks
- End-to-End Calibration using Live Measurement Data
- Import/Export data in CSV format
- Strain Gauge Rosette Measurement and Calculations in GI.bench
- How to enable sharing of GI.bench dashboard
- Configuring Gmail for Logger with MailAPI
- How to Visualize Recorded Data
- Digital Output: Process Out Conditions
- GI.bench Software Installation Guide
- How To Activate Your GI.bench Software License
- Getting Started With GI.bench
- System requirements for running GI.bench
- How to reset values cyclically
- Configuration of objects
- How to use Tare and Zero?
- How to perform FFT and spectral analysis
- Pulse Width Modulation (PWM) Output Duty Cycle
- How to scale with live measurement
- How to Write a Value to an Output Channel
- Exporting a GI.bench Project
- How to import CSV files
- Switch between projects
- Create variable names automatically
- Write Options for Configuring a Controller
- Scaling Raw Input Values to Engineering Units
- Applying Lookup Tables for Sensor Signal Linearization
- GI.bench USB License Dongle Information
- How to Acquire Data from e.pac, e.gate, or Q.gate Using GI.bench
- How to Add a Title to a Chart
Data logging
- How to Retrieve Logged Data from an SD Card Using a USB Flash Drive
- How to Configure a Data Logger for Test & Measurement Applications
- Universal Data Bin File (UDBF) Format
- How can I create a start, stop, and pause logger?
- Data logging CSV timestamp formatting
- How to Configure Hot-Swappable USB Storage for Continuous Q.station Data Logging
- How to Set Up a Snapshot Logger