GI.calib tips & tricks
      Back to home
      1. GI.knowledgebase
      2. Data Acquisition Software
      3. GI.calib tips & tricks

      GI.calib Settings

      notes and tips for GI.calib software and calibration device settings

      License

      On startup enter the code provided with the purchase. Available on request by emailing order number, first and last name, and company name to info@gantner-instruments.com

      Language

      Environment > Language > [select language]

      Module Calibration via Serial Adapter

      If the calibration procedure should be done with a direct serial communication, you can define the used Comport here.

      If a controller is present, this setting is obsolete.

      Calibration Device Settings

      Fluke Devices

      • Flow Control: XON/XOFF
      • Parity: None
      • Baud Rate: 9600
      • End of Line Character: CR/LF
      • Remote Interface: Computer