![favicon_GI.png]](https://knowledge.gantner-instruments.com/hs-fs/hubfs/favicon_GI.png?width=40&height=40&name=favicon_GI.png){kind=small}
Connectivity & Integration
Discover how GI.connectivity enables seamless integration, data exchange and communication with third-party systems.
APIs
CAN Bus
Drivers
EtherCAT
- Comparative Analysis: Q.series X Bus Coupler vs. Q.station X EC
- Starting Your Q.series XE EtherCAT Slave Implementation
- EtherCAT Oversampling with XFC technology
- Q.station X EC EtherCAT Slave Implementation Guide
- How to Configure a TwinCAT EtherCAT Master with Gantner DAQ Hardware
- How to read EtherCAT modules into AVL PUMA
- Using Q.series XE EtherCAT modules with NI VeriStand
- Gantner Hardware in dynamic Mode on MTS Series 793 Master
Ethernet
LabVIEW
Localbus
Modbus
Profibus
Plugins
- GInsARINCPlugin: ARINC 429 Integration with Gantner DAQ Systems
- What is a plugin?
- Installing a Plugin
- Plugin: Q.station EPICS server (GInsEpicsServerPlugin)
- Plugin: DDS (GInsDDSVariable)
- Plugin: EtherCAT master (GInsEtherCATMaster)
- Plugin: FFT Analyzer (GInsFFTAnalyzerPlugin)
- Plugin: Moog DAQ Server (GInsMoogDAQServer)
- Plugin: nemione (GInsNemionePlugin)
- Plugin: OPC UA Client (GInsOpcUaClient)
- Plugin: OPC UA Server (GInsOpcUaServer)
- GInsPhotonFirstPlugin: Integrate PhotonFirst FBG Interrogators with Gantner DAQ Systems
- GInsMQTTPlugin: MQTT Integration with Gantner controller
- Plugin: PROFINET IO (GInsPNIODevice)
- Plugin: Scanivalve pressure and temperature measurement (GInsScanivalvePlugin)
- Plugin: Video (GInsVideoPlugin)
- Plugin: Vestas Serial Test Interface (GInsVestasPlugin)
- Creating Your Custom Controller Plugin
- Real-Time Signal Processing Using MATLAB and Simulink on Q.station Controllers