![]() |
G5.Api 1.22.0.121
.Net API to control Regatron G5 devices
|

Public Member Functions | |
| PeakSweepConfiguration (Single startValue, Single endValue, FunctionGeneratorSweepMode sweepMode, UInt16 pointsPerSweep, Single dwellTimePerPoint, Single sweepTime, Single blockTime, PeakSweepEndBehavior sweepEndBehavior) | |
Properties | |
| FunctionGeneratorSweepMode | SweepMode [get] |
| Sweep mode. | |
| Single | SweepTime [get] |
| Total duration of the sweep [s]. | |
| Single | DwellTimePerPoint [get] |
| Dwell time per point [s]. | |
| PeakSweepEndBehavior | SweepEndBehavior [get] |
| Defines the behavior when the sweep is finished. | |
| UInt16 | PointsPerSweep [get] |
| Points per sweep []. | |
| Single | StartValue [get] |
| Start value of the sweep [V, A, W or Hz]. | |
| Single | EndValue [get] |
| End value of the sweep [V, A, W or Hz]. | |
| Single | BlockTime [get] |
| Defines the overall time of the block [s]. | |
|
inline |
|
getinherited |
Defines the overall time of the block [s].
|
getinherited |
Dwell time per point [s].
|
getinherited |
End value of the sweep [V, A, W or Hz].
|
getinherited |
Points per sweep [].
|
getinherited |
Start value of the sweep [V, A, W or Hz].
|
getinherited |
Defines the behavior when the sweep is finished.
|
get |
Sweep mode.
|
get |
Total duration of the sweep [s].